Free Newsletter
Register for our Free Newsletters
Airport, Border and Port Safety and Security
Left Nav Sep
Left Nav Sep
Civil Aircraft
Left Nav Sep
Civil Airlines, Airports and Services
Left Nav Sep
Communications and Navigation
Left Nav Sep
Education, Training and Professional Services
Left Nav Sep
Manufacturing and Materials
Left Nav Sep
Military and Defence Facilities
Left Nav Sep
Military Aviation
Left Nav Sep
Military Vehicles
Left Nav Sep
Naval Systems
Left Nav Sep
Personal Equipment
Left Nav Sep
Software and IT Services
Left Nav Sep
Space and Satellite
Left Nav Sep
Weapons, Ammunition and Explosives
Left Nav Sep
View All
Other Carouselweb publications
Carousel Web
Defense File Logo
New Material Logo
Pro Health Service Zone
Pro Manufacturing Zone
Prosecurity Zone
Web Lec Logo
Pro Engineering Zone

Two Way Bi-Directional Poppet Valves now available for Hydraulic Engineering

Integrated Hydraulics : 19 June, 2008  (New Product)
Integrated Hydraulics have further extended their range of 2 way bi-directional poppet valves with the introduction of a new 90 litre valve. Designated S716, this new valve is normally open and when energised will close, preventing flow in either direction. An actuator controlled by this valve will be locked in position despite varying induced loads or changes in system pressure.
The simple poppet design of the S716 and its sharp edged seat, coupled with closely controlled roundness and surface finish ensure consistency of quality, giving minimal internal leakage – less than 2.7cc/min at a 280 bar pressure differential. All moving parts are hardened and ground, and internal bearing surfaces honed. Despite the close working clearances, these valves are remarkably tolerant of contamination because the fluid washes over the seat, clearing it each time the valve is de-energised.

This new cartridge valve is designed for working pressures up to 280 bar and has a nominal flow rate of 90 L/min. It is of two-stage design with a small poppet, controlled by the solenoid, venting the main poppet. This arrangement offers fast, accurate operation and permits the use of coils from Integrated Hydraulics’ standard series 2 valves. 12 and 24 Vdc and 110 and 220 Vac coils are available with DIN 43650, Deutsch moulded and flying lead connectors. Bodies are available for line mounting, but, the full benefits of this technology will only be realised if the cartridges are incorporated into a manifold (or Hydraulic Integrated Circuit). The S716 is designed to work in harmony with Integrated Hydraulics’ other solenoid operated directional valves and their range of flow, pressure and motion control valves.
Bookmark and Share
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
   Â© 2012
Netgains Logo