Defense - Welding, Fabrication Services |
| |
|
Ennell Welding, based in Guiseley is a long-established welding equipment supplier well-known throughout the Leeds area for providing a broad range of products coupled with excellent service.
|
|
| |
|
The new Mig welding Guide from Murex is availabe free of charge, the first 50 to apply will also get a Murex 2009 pocket diary. |
|
| |
|
When the Irish Riverdance ferry became stranded on Blackpool beach during a storm with seventeen passengers and six crew needing to be rescued by the RAF, all attempts to re-float her failed. The decision was made to dismantle the vessel and take the sections away for recycling. To assist in this process a major role has been played by Murex Saffire gas welding and cutting equipment. |
|
| |
|
Tradesarc 250 is a robust and durable welding unit with a 400 volt three-phase portable power source equipped with a Power Factor Connection (PFC) circuit . |
|
| |
|
The Murex Transmig industrial welding power sources, 326S, 406S and 406SW, are conventional MIG/MAG/FCW power sources for MIG, MAG and flux cored wire welding applications. They use simple three-phase switch and tap technology to produce reliable performance for applications up to 400A. The 406SW model incorporates a MIG torch water-cooling unit. |
|
| |
|
Building a nuclear submarine is a complicated business – not least when it comes to the sheet metal components. The confined space and curved walls of the interior mean that many items, such as lockers, bunks, kitchen equipment and ducting for heating and ventilation have to be made as one-offs to fit the space available. |
18 September 2007: LVD (UK) |
| |
|
Arcam has introduced the Arcam A2, a Rapid Manufacturing system based on Electron Beam Melting, producing solid metal parts larger and faster than other metal additive fabrication methods. |
13 June 2007: Arcam |
| |
|
Aircam will be in Hall 4, Stand G11, together with Multistation SAS, where they will show aerospace parts made in the new, larger Arcam A2 system for Free Form Fabrication in fully dense metals, including titanium alloy Ti6Al4V. |
13 June 2007: Arcam |
| |
|
Arcam wins order for an EBM S12 for NASA |
13 June 2007: Arcam |
| |
| |
| 1 |
| |
